Work instructions for A-Plokk
Remove topsoil, fill it with flintstone if needed (1) and flatten with sand (2). Start from the corner by first putting the lower reinforcement armature to its place (3), and then installing all A-Plokk blocks (4).
Connect the corners, by cutting ends of the A-Plokk by 45 degrees (5). Let a part of the side open for filling (6). Before casting, make the nessecary apertures through the foundation. If the foundation is long and high, support it (7). Make a backfill from both sides, at least to the height of the A-Plokk (8).
Now you are ready to cast (9), so order a concrete pump (10). For casting, use an S-shaped nozzle (11) or a pipe with fine diameter (12).
Energy saving house from TermoBlock!
Building a house is a very big investment for every home owner and therefore it is especially important to choose the right solutions for fulfilling your dreams. Nowadays, the key words for construction are energy efficiency, energy saving, fast, favorable and simple construction process as well as durability and low living costs. Read more...